Flange stop Valve J41W/H
Parameters
- Valve body and valve cover cast steel, stainless steel
- Valve plate cast steel, stainless steel
- Valve stem stainless steel
Applicable industries
Petrochemical, chemical, electric power, metallurgy, pharmaceutical, food, and other industries.
Product overview
The closing member of a stainless steel flanged globe valve is a plug-shaped valve disc with a flat or conical sealing surface. The valve disc moves in a straight line along the centerline of the valve seat. The valve stem movement type is commonly referred to as a “hidden stem,” while there is also a lifting and rotating stem type, commonly referred to as an “exposed stem.” A globe valve is a type of valve where the closing member (valve disc) moves along the centerline of the valve seat.
- Product parameters
- Technical features
- Dimensions
- Installation guide
- Application examples
-
公稱壓力
Nominal pressure
PN16~40 強度試驗
strength test
nominal pressure *1.5MPa 氣密封試驗
air seal test
nominal pressure *1.1MPa -
- The structure is simpler than that of a gate valve, making manufacturing and maintenance more convenient.
The sealing surfaces are less prone to wear and abrasion, ensuring good sealing performance. During opening and closing, there is no relative sliding between the valve disc and the valve body sealing surfaces, resulting in minimal wear and abrasion. - Good sealing performance and a long service life.
When opening and closing, the valve disc has a small travel distance, so the height of the globe valve is smaller than that of the gate valve, but the structural length is longer than that of the gate valve.
The torque required for opening and closing is large, making operation more labor-intensive and taking longer time.
Fluid resistance is high because the medium passage inside the valve body is more tortuous, resulting in greater fluid resistance and higher power consumption.
Medium flow direction: The medium in a globe valve can only flow in one direction and cannot change direction.
When fully open, the valve disc is frequently subjected to erosion. - The structure is simpler than that of a gate valve, making manufacturing and maintenance more convenient.
-
DN L1 PN10 PN16 PN25 PN40 PN63 PN100 10-40 63-100 φD1 n-φh 中D1 n-φh φD1 n-φh 中D1 n-φh φD1 n-φh φD1 n-φh DN15 130 170 65 4-14 65 4-14 65 4-14 65 4-14 75 4-14 75 4-14 DN20 150 190 75 4-14 75 4-14 75 4-14 75 4-14 90 4-18 90 4-18 DN25 160 210 85 4-14 85 4-14 85 4-14 85 4-14 100 4-18 100 4-18 DN32 180 230 100 4-18 100 4-18 100 4-18 100 4-18 110 4-22 110 4-22 DN40 200 260 110 4-18 110 4-18 110 4-18 110 4-18 125 4-22 125 4-22 DN50 230 300 125 4-18 125 4-18 125 4-18 125 4-18 135 4-22 145 4-26 DN65 290 340 145 8-18 145 8-18 145 8-18 145 8-18 160 8-22 170 8-26 DN80 310 380 160 8-18 160 8-18 160 8-18 160 8-18 170 8-22 180 8-26 DN100 350 430 180 8-18 180 8-18 190 8-22 190 8-22 200 8-26 210 8-30 DN125 400 500 210 8-18 210 8-18 220 8-26 220 8-26 240 8-30 250 8-33 DN150 480 550 240 8-22 240 8-22 250 8-26 250 8-26 280 8-33 290 12-33 DN200 600 650 295 8-22 295 12-22 310 12-22 320 12-30 345 12-36 360 12-36
